Mounting; Adjusting The Deflection Head - Leuze electronic S20 Original Operating Instructions

Mounting

6 Mounting
WARNING
Severe accidents may result if the Safety Switch is not mounted properly!
The protective function of the Safety Switch is only ensured if appropriately and
professionally mounted for the respective, intended area of application.
Mounting may only be performed by competent personnel.
Observe standards, regulations and these instructions.
Protect the housing and deflection head from materials penetrating the enclo-
sure (environmental conditions (see chapter 14)).
Test to ensure proper function.
6.1

Adjusting the deflection head

Loosen the 2 screws on the deflection head.
16
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
S20 Leuze electronic