Double Models - DCS DD124-C Installation Instructions Manual

DOUBLE MODELS

SERVICES SPECIFICATIONS
WATER CONNECTION
Recommended HOT
(Maximum 140°F/60°C).
3
Supplied hose to suit / " male
8
compression fitting.
WATER SOFTENER MODELS
R
Refer to your User Guide for
how to set up your water softener.
WATER PRESSURE
Maximum
Water Softener Models 145 p.s.i. (1000kPa)
Other Models 145 p.s.i. (1000kPa)
DRAIN CONNECTION
3
Drain Hose Joiner to suit Ø / " ±
4
5
Ø1" ± / " waste tees.
64
ELECTRICAL CONNECTION
110-120 VAC power outlet, 9 Amps Minimum.
THE CAVITY
Minimum
14.5 p.s.i. (100kPa)
4.3 p.s.i. (30kPa)
5 5 5
/ ", Ø / " ± / " and
64 8 64
+
*
* Depth of product excludes
3
Curvature / " (10mm) and Handle.
8
LENGTH OF SERVICES
(FROM PRODUCT EXIT POINT)
9
Drain hose - 88 / " (2250mm)
16
Inlet hose - 68 7 / " (1750mm)
8
Power supply cord - 44" (1125mm)
NOTE: Services approximately exit product 7
5 1
21 / " (550mm) from front; 31 /
8 4
+
locations (refer to step 1 page 7)
NOTE: All depth measurements are taken
from the front face of the adjacent cabinetry.
Be sure the edges of the services hole
are smooth or covered. If the services
hole is through a metal partition the hole
must be protected with the Edge Protector
provided to prevent damage to the power
cord or hoses.
7
/ " (189mm) from left;
16
" (793mm) from top.
These marks indicate mounting tab screw
WARNING!
R
3