Printing Using Tftp - D-Link PS Admin User Manual

7. Enter the IP address of your D-Link network print server,
and the port name of the printer you wish to use.
8. Click OK to return to the Printer Ports window, and then
click Close to return to the Add Printer Wizard.
9. Click Next > to continue installing the printer, following the
on-screen instructions. The Add Printer Wizard will ask you
to select the proper driver for the printer, and will ask you to
give a name to the printer.
When you are done installing the printer, you will be able to use
any of the usual printing commands to print to your printer.

Printing using TFTP

For testing purposes, you can also use the Trivial File Transfer
Protocol (TFTP) to print to the print server. This is not a
recommended method for ordinary printing, since it will not work if
the print server is already printing.
On most systems, you can enter the command
tftp ip-address
to start the
type
put file dest-port
Setting up Unix TCP/IP Printing
client program. At the
tftp
Print Server Administration User's Guide
prompt, you can
tftp
87