D-Link PS Admin User Manual page 45

Choose values for the options as follows:
L= n
network print queue.
corresponds to LPT2, and
default, LPT1 is captured.
S= server
located on. By default, your login file server is used.
Q= queue
redirected to.
TI= n
application starts printing, if it goes for n seconds without any
additional printer output, then NetWare assumes that the
print job is finished and sends it to the printer. If your print
jobs are becoming split up you may need to increase this
setting.
F= form
can be defined using PRINTDEF.
B= bannername
the job. By default the banner text is
the banner entirely using the
You can add the CAPTURE command to your network startup
batch file, or add it to your login script preceded with a
Setting up Novell NetWare 3.x Printing
Determines which local port will be redirected to the
L=1
Determines which server the print queue is
Determines which print queue your print jobs are
Sets the timeout for Autoendcap. After your
Determines which form print jobs will use. Forms
Sets the text that appears on the banner for
Print Server Administration User's Guide
corresponds to LPT1,
corresponds to LPT3. By
L=3
. You can disable
LST:
option.
NB
L=2
symbol.
#
39