Print Server Setup Procedure - D-Link PS Admin User Manual

Print Server Administration User's Guide
NetWare file server to be more heavily loaded, and increases delays
in network printing.

Print Server Setup Procedure

This section describes how to configure your D-Link print server to
act as a NetWare print server, and how to set up a print server port
to serve a print queue on the file server.
1. Make sure you are logged on to your NetWare server as
SUPERVISOR, or that you have permissions equivalent to
SUPERVISOR.
2. Make sure that the NetWare protocol is enabled in the server.
This setting is found in the Configuration - Server Device
window, accessible by selecting the print server and choosing
Server Device... from the Configuration window.
3. Choose Netware Protocol... from the Configuration menu,
or click the Configure NetWare button in the toolbar. Click
on the Bindery Print Server tab.
26
Setting up Novell NetWare 3.x Printing