Changing Print Server Port Settings - D-Link PS Admin User Manual

Changing Print Server Port Settings

Your D-Link network print server provides a number of parallel
and/or serial printer ports. For each port, you can determine:
The name of the port
A comment describing the port
For parallel ports,
For serial ports,
To set the parameters for a printer port,
1. Select the print server in the PS Admin main window's server
name display (or extended server display).
Getting Started Setting up Your Print Server
Whether or not data can be sent to the port at high speed
Whether or not the attached printer supports HP's PJL
(Printer Job Language) protocol.
The serial port speed (baud rate), in bits per second.
How many data bits are sent per byte
How many stop bits are sent with each byte
Whether or not a parity bit is sent, and if so what kind
(even or odd parity)
Whether or not software flow control is used
(XON/XOFF)
Whether or not hardware flow control should be used, and
if so what kind (DTR, RTS, or DTR/RTS).
Print Server Administration User's Guide
17