Upgrading The Print Server's Internal Firmware - D-Link PS Admin User Manual

WARNING: Do not perform a factory reset unless you are absolutely sure
this is what you want. All settings will be erased and replaced
with their original values.
To perform the reset:
1. Select Reset or Factory Reset from the Tools menu.
2. PS Admin will ask for confirmation for the reset.
3. Click Yes to confirm. The print server will reset itself. If you
selected Factory Reset, all of the print server's default
configuration values will be restored.

Upgrading the Print Server's Internal Firmware

The print server's internal software is stored in Flash memory,
which allows you to upgrade it to an updated version without
shipping the print server back to your distributor. Consult your D-
Link dealer for information about when updated print server
firmware versions are available.
You will also need to have copies of the updated firmware.
Firmware updates are contained in to related files, a larger one with
a
.bin
Both of these files are necessary for the download to be completed
successfully.
To perform the download:
PS Admin Administration
extension, and a smaller one having a
Print Server Administration User's Guide
extension.
.dwl
105