Print Server Administration User's Guide
[Server Configuration]
1 - Server Name
2 - Location
3 - Admin Contact
4 - Change Password
0 - Return to Main Menu
Enter Selection:
2. To change the server name, location, or admin contact,
choose the appropriate menu item. The print server will
prompt for the new value.
If you are setting the server name, be sure to follow the
recommendations described in the Choosing a Name for Your
Print Server section on page 13 of this manual.
3. When you are done changing the server settings, choose 0 to
return to the Main Menu.
4. Choose the Save Configuration menu item. The print server
will ask for confirmation:
Do you really want to save configuration? (y/n)
Answer Y to confirm the save. The
drop, and the print server will reset itself, letting the new server
configuration take effect.
Changing the Print Server Password
The print server password is used to protect the print server's
configuration from changes, either through the PS Admin program,
or through the
118
interface.
telnet
Appendix: Telnet Interface Administration
<PS-142634>
<D-Link Taichung>
<Benjamin>
connection will
telnet