Attaching The Motor To The Boat - Watersnake Combat 54/48 Owner's Manual

COMBAT
WATERSNAKE ELECTRIC MOTORS
Congratulations and welcome to a world of silent motoring.
Powerful yet silent, the Watersnake electric motors are built to suit all angling
conditions. High quality materials, superior design and precision engineering
make these motors longwearing and reliable.
Please read manual completely before starting installation.

ATTACHING THE MOTOR TO THE BOAT

The Combat motor integrates a quick release bracket mechanism.
Attach the bracket to the bow of the boat, taking care to ensure it is on the
centreline of the boat and placed forward enough so that when the motor is
attached the shaft of the motor is not making contact with the boats gunwale
rubber. With the bracket in position, mark the holes for drilling, ensuring as
you do that the bow area below the mounting location is clear and accessible.
Attach the bottom Nylon bracket to the bow using the stainless steel bolts,
nuts and washers provided. It is important when doing this work that the boat
is level.
1.
Attach top plate to the bracket
2.
Attach bottom plate to the boat.
3.
Position motor bracket over top of bottom plate.
4.
Push steel locking wire into locking plate
Locking wire.
PLEASE NOTE:
Watersnake Distribution accepts no liability for personal injury or property damage caused while
drilling/mounting this motor. Please wear appropriate protective clothing and eyewear/ face shield.
www.watersnake.com.au
1.
Top plate (Attach to motor mount)
2.
Bottom plate (Attach to boat)
Plates fitted and locked together.
5