D-Link AirPremier DWL-2210AP Manual page 83

Configuring Security
Field
Authentication Server
Radius IP
Radius Key
Key Type
Enable
RADIUS Accounting
Allow non-WPA Clients
Description
Select one of the following from the drop-down menu:
Built-in
• - To use the authentication server provided with the D-
Link DWL-2210AP. If you choose this option, you do not have to
provide the Radius IP and Radius Key; they are automatically
provided.
External
• - To use an external authentication server. If you
choose this option you must supply a Radius IP and Radius
Key of the server you want to use.
Note: The RADIUS server is identified by its IP address and UDP
port numbers for the different services it provides. On the current
release of the D-Link DWL-2210AP, the RADIUS server User
Datagram Protocol (UDP) ports used by the access point are not
configurable. (The D-Link DWL-2210AP is hard-coded to use
RADIUS server UDP port 1812 for authentication and port 1813
for accounting.
Enter the Radius IP in the text box.
The Radius IP is the IP address of the
(The D-Link DWL-2210AP internal authentication server is
127.0.0.1.)
For information on setting up user accounts, see "Managing User
Accounts" in this manual.
Enter the Radius Key in the text box.
The Radius Key is the shared secret key for the RADIUS server.
The text you enter will be displayed as "*" characters to prevent
others from seeing the RADIUS key as you type.
(The D-Link DWL-2210AP internal authentication server key is
secret.)
This value is never sent over the network.
Select the key type by clicking one of the radio buttons:
• ASCII
• HEX
Click "Enable RADIUS Accounting" if you want to enforce
authentication for WPA
passwords for each station.
See also "Managing User Accounts" in this manual.
Click the "Allow non-WPA
WPA (802.11), unauthenticated client stations use this access
point.
83
RADIUS
client stations with user names and
clients" checkbox if you want to let non-
server.