D-Link AirPremier DWL-2210AP Manual page 75

Configuring Security
Field
Transfer Key Index
Key Length
Key Type
Characters Required
WEP Keys
Description
Select a key index from the drop-down menu. Key indexes 1
through 4 are available. The default is 1.
The Transfer Key Index indicates which WEP key the access
point will use to encrypt the data it transmits.
Specify the length of the key by clicking one of the radio buttons:
• 64-bits
• 128-bits
Select the key type by clicking one of the radio buttons:
• ASCII
• Hex
Indicates the number of characters required in the WEP key.
The number of characters required updates automatically based
on how you set Key Length and Key Type.
You can specify up to four WEP keys. In each text box, enter a
string of characters for each key.
If you selected "ASCII", enter any combination of integers and
letters , , and
0-9 a-z
hexadecimal digits (any combination of
Use the same number of characters for each key as specified in
the "Characters Required" field. These are the RC4 WEP keys
shared with the stations using the access point.
Each client station must be configured to use one of these
same WEP keys in the same slot as specified here on the AP.
(See "Rules to Remember for Static WEP" in this manual.)
75
. If you selected "HEX", enter
A-Z
0-9
and or ).
a-f A-F