D-Link AirPremier DWL-2210AP Manual page 11

Prelaunch Checklist
Default Settings (continued):
Option
Connection Type
Subnet Mask
Radio
IEEE 802.11 Mode
802.11g Channel
Beacon Interval
DTIM Period
Fragmentation
Threshold
RTS Threshold
MAX Stations
Transmit Power
Rate Sets
Supported (Mbps)
Default Settings
Dynamic Host Configuration
Protocol (DHCP)
If you do not have a
the Internal network and do not plan
to use one, the first thing you must do
after bringing up the access point is to
change the Connection Type
from "DHCP" to "Static IP." The Guest
network must have a DHCP server.
None
This is determined by your network
setup and DHCP server configuration.
On
802.11g
Auto
100
2
2346
2347
2007
100 percent
• IEEE 802.1g: 54, 48, 36, 24, 18,
12, 11, 9, 6, 5.5, 2, 1
• IEEE 802.1b: 11, 5.5, 2, 1
Related Information
DHCP server on
11
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"
"Configuring Radio Settings"