D-Link AirPremier DWL-2210AP Manual page 118

Maintenance and Monitoring
Interfaces
To monitor wired LAN and wireless LAN (WLAN) settings, navigate to
on the access point you want to monitor.
On a two-radio access point, current wireless settings for both Radio One and Radio
Two are shown. On a one-radio access point, settings are shown for one radio. The
Interfaces page for a two-radio AP is shown in the following figure.
This page displays the current settings of the D-Link DWL-2210AP. It displays the
(Wired) Settings
and the
Ethernet (Wired) Settings
The Internal interface includes the Ethernet
and Associated Network Wireless Name (SSID).
The Guest interface includes the MAC Address,
Wireless Name (SSID).
If you want to change any of these settings, click the "Configure" link.
Wireless Settings.
118 118
MAC Address, IP
VLAN ID, and Associated Network
Status > Interfaces
Ethernet
Address, Subnet Mask,