D-Link AirPremier DWL-2210AP Manual page 143

Appendix A: Configuring Security Settings on Wireless Clients
1. Configure the following settings on the Association tab on the Network Properties
dialog.
Association Tab
Network Authentication
Data Encryption
This key is provided for me
automatically
2. Configure these settings on the Authentication tab.
Authentication Tab
Enable IEEE 802.1x
authentication for this network
EAP Type
Enable (click to check) "validate
server certificate."
Select (check) the name of certificate
on this client (downloaded from
RADIUS server in a prerequisite
procedure)
Open
WEP
Note: An RC4 stream cipher is used to encrypt the
frame body and cyclic redundancy checking (CRC) of
each IEEE 802.11 frame. This is the same encryption
algorithm as is used for Static WEP; therefore, the data
encryption method configured on the client for this
mode is WEP.
Enable (click to check)
Enable (click to check) this option.
Choose Smart Card or other Certificate.
143