Strain gauge voltage input, current input data acquisition modul (7 pages)
Summary of Contents for ICP DAS USA I-7083
Page 1
1. Introduction The I-7083 and I-7083B are 3-axis high speed encoder modules. Each axis on the module can be independently confi gured as one of Quadrant, Pulse/Dir or CW/CCW input mode with a maximum input rate of 1 MHz. The high-end specifications of the I-7083/I-7083B and complete software support make it ideal for a wide range of applications in position measurement of motion systems working in industrial and laboratory environments.
- Mode= 5 for 7083, L=0, XOR=1, CwCcw mode D for 7083B, L=1, XOR=1, CwCcw mode I-7083 3-axis, 32-bit Encoder Counter DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717...
Page 3
It can select multi-options such as Baud Rate, Protocol, Checksum, and Format to search module. The default settings for the module can be found in Section 3. Click OK after selecting the COM port setting. I-7083 3-axis, 32-bit Encoder Counter DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 4
DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS and the others modules. 6. Configuration I/O module setting on PC I-7083 3-axis, 32-bit Encoder Counter DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 5
If user doesn’t know command, user can select Address and ID, it will show some refer commands as below. User can select necessary command to test or debug modules. I-7083 3-axis, 32-bit Encoder Counter DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com...