Starting The Calibration Programme - Miele WCI 670 Operating Instructions Manual

Using other detergents with TwinDos
The TwinDos dispenser can be used for
other liquid detergents. Refillable
TwinDos containers (optional
accessories) are required for this. See
"Settings - TwinDos" for more detailed
information.
5. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open  and run 'Cottons' 90°C without
laundry
 Touch the  sensor until the OK
sensor lights up and confirm this with
OK.
 
90° 1600
 
 Turn on the tap.
 Touch the Start/Stop sensor.
The calibration programme is started. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:
Before using for the first time

 Reach under the door grip and pull
Useful tip: For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
 Turn the programme selector to the
1:55
OK
Set up completed
the door open.
 position.
23