Remoteupdate; Running A Remoteupdate - Miele WCI 670 Operating Instructions Manual

RemoteUpdate

The RemoteUpdate function is used for
updating the software in your washing
machine.
The RemoteUpdate function is
deactivated as standard.
If you do not install a RemoteUpdate,
you can continue to use your washing
machine in the usual way. However,
Miele recommends installing
RemoteUpdates.
Activation
The RemoteUpdate menu option is
only displayed and can only be
selected if you have added your
washing machine to your Wi-Fi
network (see "Miele@home" in the
"Settings" chapter).
Miele's RemoteUpdate function can
only be used if the washing machine is
connected to a Wi-Fi network and you
have an account in the Miele@mobile
app. The washing machine must be
registered with your account in the app.
See the Miele@mobile app for terms
and conditions of use.
Some software updates can only be
carried out by Miele Service.

Running a RemoteUpdate

If a RemoteUpdate is available for your
washing machine, it will be displayed
automatically for you.
You can choose to start the
RemoteUpdate immediately or wait until
later. If you select "Start later", the
prompt to run the RemoteUpdate will
be displayed again the next time you
switch on your washing machine.
The RemoteUpdate can take a few
minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
a RemoteUpdate is available.
– Once a RemoteUpdate has been
installed, it cannot be undone.
– Do not switch off the washing
machine during a RemoteUpdate.
Otherwise, the RemoteUpdate will be
aborted and will not be installed.
Settings
99