Table of Contents
Advertisement
Internet Server User' s Guide
Inspect the device and all accompanying items. If any item is dam-
aged or missing, report the problem immediately to your dealer.
Desktop / Shelf Installation
The unit has rubber feet attached to the bottom to cushion it. Allow
enough ventilation space between the device and the objects around
it. Choose a sturdy, level surface in a ventilated area that is dust
free and away from heat vents, warm air exhaust from other devices
and direct sunlight. Avoid proximity to large electric motors or other
electromagnetic equipment.
Observe the following guidelines when choosing an installation loca-
tion:
Air temperature should range from 32 to 122 F (0 to 50 C).
Humidity should be less than 90%, non-condensing.
Site should not exceed the electromagnetic field standards for
IEC 801-3, Level 2 (3V/M) field strength.
For a detailed list of the product's technical specifications, refer to
Appendix B, Specifications.
Wall Installation
The DP-601M comes complete with a wall mount kit. This kit in-
cludes two screws and two plastic anchors. For a proper placement
on the wall, follow these steps:
Select a site that is free of obstructions from other equipment
or devices. Consider the following points for site selection:
6
Installation
Advertisement
Table of Contents
