Table of Contents
Advertisement
10 Mbps Ethernet connections must use Category 3 or
better twisted-pair cabling fitted with RJ-45 connectors.
100 Mbps Fast Ethernet connections must use shielded
twisted pair (STP) or Category 5 or better unshielded
twisted-pair (UTP) cables fitted with Category 5 RJ-45
connectors.
Cat 5 UTP cables use the same RJ-45 connector used
with 10BASE-T, wired in the same configuration.
Connections
As mentioned before, the internet server comes equipped with an
NWay Ethernet/Fast Ethernet RJ-45 LAN port. To connect the
internet to your LAN, simply plug one end of a straight-through ca-
ble into the LAN port on the internet server, and the other end into a
normal (non-Uplink) port on a hub or switch (as shown below). Both
devices can be receiving power when making this connection.
Installation
LAN Connection
Internet Server User' s
11
Advertisement
Table of Contents
