Table of Contents
Advertisement
IPs. It is paired with the next variable to create an address
range.
IP Address Range -> End
This is the second of the DHCP IP address range Settings.
Options:
ranges. The IP address used must correlate with the IP set in
the Beginning range variable.
Default Value: 192.168.100.150
Description: This variable indicates the end of the range of
IP addresses available for DHCP use in assigning IPs. It is
paired with the previous variable to create an address range.
IP Lease Time
Options: An amount of time, measured in minutes, from 5
to 65535.
Default Value: 1440 (24 hours)
Description: Dynamically assigned addresses can be peri-
odically "refreshed" by a DHCP server. The IP Lease Time
variable allows you to set that time limit. If a time is entered
in this variable, each dynamically assigned address will be re-
cycled at the end of the lease time.
IP Reserve Table
Options: Local IP Address, MAC Address (a maximum of 16
separate line entries).
Default Value: (none)
Configuration Settings
Any IP address within the three reserved IP
Internet Server User' s Guide
39
Advertisement
Table of Contents
