Setting The System Into Pairing Mode; Carefree Connects Mobile App - Carefree TRAVEL'R Owner's Manual

Carefree of Colorado
S
ETTING THE
To add peripheral devices (such as remotes) they must be paired to the BT12 Control
Module.
1. Turn power to the awning ON.
2. Extend the awning.
awning does not have to be opened
completely.
3. Retract the awning.
4. When the awning is fully retracted,
press and hold the retract switch for 3
seconds.
4.1. The awning is now in pairing
mode for 5 minutes.
5. The BT12
automatically pair to the device then
go to working mode.
NOTES:

The module will pair to the physically closest unpaired device first. Repeat
the pairing steps for each additional device (the module remembers the devices
that have been paired).

Refer to the Carefree Connects Mobile App manual for setting up and
pairing a smart device (such as a smart phone or tablet).

Multiple devices can be paired to the awning up to a maximum of 8
peripheral devices.
Only one active BT Motion Sensor can be paired to the BT12 Control
o
Module.
Only one active BT Remote can be paired to the BT12 Control Module.
o
Multiple mobile devices (smartphone or tablet) can be paired to the
o
BT12 Module but only 1 can be active at a time.
10
S
YSTEM INTO
Note that the
control module
P M
AIRING ODE
will