D-Link DG-102S Quick Install Manual page 4
Voip station gateway
Hide thumbs
Also See for DG-102S:
- User manual (69 pages) ,
- Quick start manual (14 pages) ,
- Specification sheet (2 pages)
Advertisement
Plug in the power supply as shown.
The Power LED in the front panel will turn on to indicate proper
operation.
After plugging in the power supply, the HyperTerminal screen should
now display the following screen:
The HyperTerminal screen will prompt you to press any key. Press the Space Bar
button on your keyboard to allow the DG-102S to finish the boot process. You should
now see the DG-102S go through its POST (Power On Self Test).
At this point, you may close the HyperTerminal screen and move on to the next
section.
Advertisement
