Configuring The Voip Gateway Using A Web Browser; Setting Up A Connection - D-Link DG-102S Quick Install Manual

Configuring the VoIP Gateway using a Web Browser

Setting Up a Connection

In order to use a web browser to configure the VoIP gateway, you
must be sure it has a valid Ethernet connection from the PC to the
LAN port. The VoIP gateway comes with a default LAN (Local Area
Network) IP address of 192.168.0.1 and a subnet mask of
255.255.255.0.
Make sure the PC is in the same IP range as the VoIP gateway. You can do this by
changing the IP address of the PC.
By default, the DG-102S is a DHCP Server. You can set your computer to obtain an
IP address. Follow the below steps to do so. If you prefer, you can set your computer
up with a static IP address in the range of 192.168.0.2 ~ 192.168.0.254.
Right-Click the Network
Neighborhood (Win 98/98SE)
or My Network Places (Win ME/2K/XP)
icon on your desktop.
Select "Properties"
Highlight the TCP/IP setting for the installed
Ethernet Network Adapter.
Click "Properties"