Manufacturer's Identification Label Description; Installation And Assembly - Fagor FUR-27-N Manual Instructions

2.4

Manufacturer's identification label description

The data plate is located inside the cabinet, near the top front, left corner.
Under no circumstances should the data plate be removed from the unit. The data
plate is essential to identify the particular features of your machine and it is of
great benefit to
recommended that, in the event the data plate is removed, you copy down the
essential information in this manual for reference before installation. Removal of
data plate will void the warranty.
Refrigerant
Type
Code
2.5

Installation and assembly

Units represented in this manual are intended for indoor use only. Be sure the
location chosen has a floor strong enough to support the total weight of the
unit and contents. For the most efficient operation, be sure to provide good air
circulation inside and outside of the unit.
INSIDE CABINET
The first cleaning must be made when you unpack the unit and before switching it
on. Clean it with water and a mild detergent. When it is clean and dry, insert the
accessories in the appropriate places, for the best use of the user.
OUTSIDE CABINET
Be sure the unit has good air circulation around it. Avoid hot corners and
locations near stoves and ovens. It is recommended the unit be installed no
closer than 2" from any wall. The place where the refrigerator is placed must be
open and clean, avoiding that de fan of the condensing unit absorbs materials
which are deposited then into the condenser blades and coil, which can produce
failures.
installers, operators,
7
fagorindustrial.com
and maintenance personnel.
Serial Number
(8 digits and ends in "M")
It is
Model
Electricals