Support And Documentation - Sophos SG 430 Quick Start Manual

Quick Start Guide SG 430/450 Rev. 2
LEDs on each SFP+ connector
ACT/LINK Green Constantly
(Left LED)
Flashing
Off
Speed Blue On
(Right LED)
Amber On
Off
LAN Bypass (LED Display)
LAN Bypass Active Green
LAN Bypass Off Off
Back side
Power Supply Green Constantly
Off

6. Support and Documentation

For more information and technical support, please visit
support or contact your local Sophos reseller.
1. The SFP+ connector is receiving power.
2. Good linkage between the SFP connector and hub.
The adapter is sending or receiving network data. The
frequency of the flashes varies with the amount of traffic.
1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded
or do not function correctly.
The SFP+ connector is operating at 10,000 Mbps.
The SFP+ connector is operating at 1,000 Mbps.
Either the LED is not working or the SFP+ connector
is operating at a speed below 1,000 Mbps.
Power
No power
www.sophos.com/en-us/
5