Pioneer SPH-10BT Operation Manual page 11

4
Attach the front panel to the unit (page 4).
INITIAL settings
1
Press and hold
2
Press and hold
3
Press to select [INITIAL], then press
4
Press to select an option, then press
Menu Item
FM STEP
[100KHZ], [50KHZ]
SP-P/O
[FUL/SUB]
[SUB/SUB]
[FUL/FUL]
UPDATE
[S/W VER], [START]
until the unit turns off.
to display the main menu.
Description
Select the FM tuning step from 100 kHz or 50 kHz.
Select when there is a full-range speaker connected to the rear
speaker output leads and there is a subwoofer connected to the
RCA output.
Select when there is a passive subwoofer connected directly to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
Select when there are full-range speakers connected to the rear
speaker output leads and RCA output. If there is a full-range
speaker connected to the rear speaker output leads, and the
RCA output is not used, you may select either [FUL/SUB] or [FUL/
FUL].
Select [S/W VER] to confirm the latest system information on the
unit.
Select [START] to update the unit to the latest software and
initialize the unit settings. For details on the latest software and
updating, visit our website.
- 11 - - 11 -
to confirm.
to confirm.