Pioneer SPH-10BT Operation Manual page 24

Menu Item
BEEP
[Y], [N]
AUTO PI
[Y], [N]
PW SAVE*
[Y], [N]
BT CLR
[YES], [NO]
APP CTL
[BT], [WIRED]
USB AUT
[Y], [N]
DISP OFF
[Y], [N]
ATT/MUT
[MUTE], [ATT]
DEV INF
* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once
the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may
Description
A beep can be heard when any button is pushed.
Select [N] to disable this function.
Search for a different station with the same
programming, even if using a preset station.
Reduce the battery power consumption.
Turning on the source is the only operation
allowed when this function is on.
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
Select the appropriate connection method
according to your device.
See page 25 for details on the connections for
each device.
Select [Y] to automatically switch to USB source
when a USB device/iPhone is connected to the
unit.
Select [N] when a USB device/iPhone is being
connected to the unit just for charging.
Set to off the screen display and all key's
illumination.
Select mute or attenuate the volume when the
volume key is pressed and held.
Displaying the device information.
- 24 -