Panasonic CS-MZ16VKE Service Manual page 66

14.13.3 Application Installation
For Android user (Android 4.4 and above)
GET IT ON

Google Play
Open .

Search for Panasonic Comfort Cloud app.

Download and install.
Note

The app user interface image may change for version upgrade without notification.

There is no charge for using this application. However, other charges may be incurred for connection and
operation.
14.13.4 To Disconnect Wireless LAN (Off Wireless LAN LED)

Press and release one time at the Remote Control Wireless LAN button and the LED will turn off. (LED ON ->
LED OFF).
14.13.5 To Delete Wireless LAN Information

If Wireless LAN is off (LED is Off), turn on Wireless LAN first by press and release one time the Wireless LAN
button. (LED OFF -> LED ON).

Push Wireless LAN button for 5 seconds.

In the Remote Control Operation select "5" and push for 3 seconds.

Initilization is finish and Wireless LAN LED will off automatically.
14.13.6 To Check Wireless LAN Signal Strength

Confirm the air conditioner operation is stopped and press the Wireless LAN button for 5 seconds.

Select "4" in the remocon then press set button and operation stops.

After 5 seconds, the signal strength is shown on the indoor unit Wireless LAN LED.
Strong Signal: Blink 3 times with an interval.
Moderate Signal: Blink 2 times with an interval.
Weak Signal: Blink once with an interval.
No Signal: OFF.

It will stop automatically after 10 minutes. To stop immediately, press Wireless LAN button.
14.13.7 Wireless LAN Failure Diagnosis
14.13.7.1 Between ID Micon and Wireless LAN Module Failure Detect Condition

When module and ID micon (CN-LAN) communication is following below condition.
No response against sending data.
o
Reply error against sending data.
o
Regularly sending from AC unit (Every 1 minutes).
o

Either one from above condition occur, detection will start.

If for certain time there is no communication and retry is implemented 3 times continuously confirm the error by
following below table.

When failure diagnosis H85 occur.
When error condition check
When retry
After confirm failure

Cancel Condition: From the module the reply data or the regularly sending data (normal data) is recognized by ID
micon.
When failure canceled
For iOS user (iOS 9 and above)
Download on the

Open App Store

Search for Panasonic Comfort Cloud app.

Download and install.
Wireless LAN LED
Light up
Light up
No light
Wireless LAN LED
Light up
.
Timer LED
No light
No light
Blinking
Timer LED
No light
66