Panasonic CS-MZ16VKE Service Manual page 127

18.2.2.3 Setting Connection Network
Connection Guide
Step 1 Step 1 Step 2 Step 2 Step 3 Step 3
Make sure smartphone is connected to same
wireless network.
When Wireless LAN LED is ON, tap "Next".
Point the remote control to air- condi oner
and press the "Wireless LAN" bu on once.
When Wireless LAN LED is blinking, tap "Next".
SET Wireless LAN
CANCEL
LED
Wireless LAN Wireless
LAN bu on bu on
Next
Cancel
1. Ensure Wireless LAN LED is ON.
point the remote control to air conditioner
and press Wireless LAN
Wireless LAN LED changed to blinking.
18.2.2.4 Connection Network Using WPS Mode (Method 1)
Connection Guide
Step 1 Step 2 Step 3
The router supports WPS.
Connect with WPS mode
The router does not supports WPS.
Connect with AP mode
Cancel
1. Select 'Connect with WPS mode'.
Step 1
Wireless LAN LED.
LED is OFF
LED is ON
LED is Blinking
2. When Wireless LAN LED is blinking,
select preferred connection setup mode.
button until the
Step 1
2. Press the "WPS" button from the router
that will be connected to an air
conditioner.

Check the status of Wireless LAN
LED on the remote control. If the
Wireless LAN LED is OFF, press the
Wireless LAN
Wireless LAN connection.
Connection Guide
Step 2 Step 3
Cancel
Connection Guide
Step 2 Step 3
Next
Cancel
button to enable the
127
Connection Guide
Step 1 Step 2 Step 3
The router supports WPS.
Connect with WPS mode
The router does not supports WPS.
Connect with AP mode
Cancel
3. Select the preferred router support
connectivity mode.
Connection Guide
Step 1 Step 2 Step 3
If Wireless LAN LED is OFF during the connec on
setup, please press "Wireless LAN" bu on once
to enable the Wireless LAN before proceeding to
step .
Press and hold "Wireless LAN" bu on for 5
secs un l easy se ng " 1" is shown.
Point remote control to air-condi oner and
press "SET" bu on once.
A er step & have been done, tap "Next".
SET
CANCEL
Next
Cancel
3. Ensure Wireless LAN LED is ON. Press
and hold the Wireless LAN
for 5 seconds until "1" is shown on the
remote control and press
to the air conditioner.
button
pointing
SET