Panasonic CS-MZ16VKE Service Manual page 34

12.2.9 How to Replace Network Adapter

Remove the front grille (refer how to take out front grille) from the unit.

Remove the network adapter box by releasing the hook (Figure 1.0).

Remove the cover by unclipping it and pulling it out (Figure 1.1).

Remove the top casing by pressing the side of the network adapter box. (Figure 1.2)

After that, network adapter can be easily replaced (Figure 1.3).
Hook
12.2.10 Check the Drainage

Open front panel and remove air filters.
(Drainage checking can be carried out without
removing the front grille.)

Pour a glass of water into the drain tray-styrofoam.

Ensure that water flows out from drain hose of the
indoor unit.
12.2.11 Evaluation of the Performance

Operate the unit at cooling/heating operation
mode for fifteen minutes or more.

Measure the temperature of the intake and
discharge air.

Ensure the difference between the intake
temperature and the discharge is more than 8°C
during Cooling operation or more than 14°C
during Heating operation.
Figure 1.0 Figure 1.1
Press
Press
Figure 1.2
Unclip & pull down
34
Figure 1.3
Drain tray-styrofoam
Discharge air