Mira Element Thermostatic Mixer Installation And User Manual page 23

2.3 Make sure that the Mixer is level and
central in the hole, and square to the
finished wall surface (or the control
components will not fit correctly),
then mark the positions of the Fixing
screw holes on the wall.
2.4 For solid walls drill two 6 mm holes
for the Wall Plugs.
2.5 insert the Wall Plugs (supplied) and
attach the Mixer to the wall with the
screws provided.
note! For stud partition installations
alternative fixings may be required
(not supplied) to fix the Mixer to the
rear face of the wall cavity or to a
timber noggin.
2.6 refer to section: '1. solid Wall or
stud Partition (using securing
Brackets - Mounting off Front Face
of Wall)' and follow steps 1.10 to
1.18.
hot supply
23
outlet Pipe to Fittings
cold supply
screws