Connecting Of The Water Hose To The Cold Water Mains Line - Beko ASN541B User Manual

Installation
3. 5-meter long water hose (1/4 inch in
diameter)
4. (4) Cold mains water valve with mesh
filter (tap adapter)
5. (5) External water filter.
3.8. Connecting
the water hose to
the refrigerator
1. Slip the union (b) onto the water hose
(a).
2. Push the water hose downwards firmly
to slip it onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure
it onto the water inlet valve.
C Normally, you are not required
to tighten the union with a tool.
However, you can use a spanner or
pliers to tighten the union if there
is a leakage.
3.9. Connecting of
the water hose to the
cold water mains line
ASP341 models only
(This feature is optional)
If you will use the refrigerator by
connecting it to the cold water mains
line, you must install a standard 1/2"
valve connector to the cold water
installation of your home. If this valve is
not present or you are not sure, consult a
qualified plumber.
1. Separate the union from the tap
adaptor.
2. Install the tap adaptor to standard 1/2"
valve connector.
3. After inserting the water hose to the
union, install it to the tap adaptor and
insert to the union to the tap adapter.
4. Tighten the union by hand.
10 / 41 EN
Refrigerator / User Manual