Troubleshooting; Introduction - John Lewis JLWM1417 User Manual

Troubleshooting

Warning! Refer to Safety
chapters.

Introduction

The appliance does not start or it stops during
operation.
First try to find a solution to the problem (refer
to the table). If the problem persists, contact the
Authorised Service Centre.
In case of major problems, the acoustic
signals operate, the display shows an
alarm code and the Start/Pause button
may flash continuously:
• - The appliance does not fill with water
properly. Start the appliance again by pressing
Start/Pause button. After 5 seconds the door
will be unlocked.
• - The appliance does not drain the
water.
• - The appliance door is open or not
closed correctly. Please check the door!
If the appliance is overloaded,
remove some items from the
drum and/or hold the door
shut while touching the Start/
Pause button until the indicator
stops flashing (see the
picture below).
36
• - The mains supply is unstable. Wait until
the mains supply is stable.
• - No communication between electronic
elements of the appliance. Switch it off and
switch on again. The programme was not
finished properly or the appliance stopped too
early. If the alarm code appears again, contact
the Authorised Service Centre.
Warning! Deactivate the
appliance before carrying out
any check.
Washing Machine User Manual