Receive A Call; Earpiece/Receiver Volume - BT 500 User Manual

16
Using the phone
Caller Display
If you have subscribed to your
network's Caller Display service, the
caller's number (or name if stored in
the phonebook) is displayed instead
of Call. See page 57 for
External
more information.
If the number is longer than 15 digits,
the display will only show the last 15
digits entered.
Auto answer
As long as you have auto answer set
to ON you can just pick the handset
up off the base to answer a call. If you
have switched it off, you will need to
press . Auto talk OFF is the default
setting. For more information on auto
answer, see page 33.
Internal calls
If the call is from another internal
handset, the number of the calling
handset will be displayed, instead of
External Call.
You can also adjust the earpiece /
receiver volume using the menu, see
page 29.
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

Receive a call

When you receive a call, the phone rings and the
flashes in the display.
To answer the call:
1. If your handset is on the base and auto talk is on, pick up
the handset.
Or
If your handset is on the base and auto talk is off, pick up the
handset and press
Or
If your handset is off the base, press

Earpiece/receiver volume

During a call you can adjust the volume of the
earpiece/handset receiver. There are 5 volume settings,
which are shown as Volume 1, 2, 3, 4 or 5 on the display.
1. Press
UP
As you increase or decrease the volume, the volume level is
displayed on the screen.
.
to increase or to decrease the volume.
DOWN
icon
.