Page 1
User Manual 12” Desk Fan MODEL: WFD12 1. READ these instructions carefully before installing and operating the appliance. Keep them for further reference. 2. Record in the space below the “SERIAL/MODEL NUMBER” found on the back or bottom of your appliance and retain this information for future reference.
SAFETY INFORMATION DANGER WARNING CAUTION DANGER - Immediate hazards WARNING - Hazards or unsafe CAUTION - Hazards or unsafe which WILL result in severe practices which COULD result in practices which COULD result in personal injury or death severe personal injury or death minor personal injury IMPORTANT SAFETY INSTRUCTIONS WARNING...
NOTE: Neither Westinghouse nor the dealer can accept any liability for damage to the product or personal injury resulting from failure to observe the electrical connection procedures.
SET UP & USE PARTS & FEATURES FRONT Plastic Nut Rear Guard Blade Motor Shaft Front Guard Oscillation Knob Fan Body Controls Spinner Turn right to loosen Turn left to tighten Base with attachment screw Page 4...
SET UP & USE SET UP & USE FAN ASSEMBLY BASE ASSEMBLY 1. Detach screw from base of the fan. 2. Match locking tab on bottom of fan body to base and click into position. 3. Tighten screw into base to secure the base to the fan body. ASSEMBLY OF BLADE AND GRILLS 1.
TROUBLESHOOTING & WARRANTY CLEANING AND MAINTENANCE • Before cleaning and assembling, unplug the fan. • Plastic parts of the fan should be cleaned with mild soap and a damp cloth or sponge. Rinse with clean water to remove any soapy film residue. •...
TROUBLESHOOTING & WARRANTY LIMITED WARRANTY 11. To glass parts and other accessory items that are included with the unit. Westinghouse brand is used under license. 12. Transportation and shipping costs associated with the replacement of Any repair, replacement, or warranty service, the unit.
Page 8
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation. Used under license by W Appliance Company. All Rights Reserved. 022817 Page 8...
Need help?
Do you have a question about the WFD12 and is the answer not in the manual?
Questions and answers