Table of Contents
Advertisement
92 | Main Menu
2 Select More . . . → Networks → Networks Sel → Any Network.
3 Your radio selects and registers to the network automatically from the predefined list.
Using the Migrate To Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out of the range of
your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the
2 Select More . . . → Networks → Networks Sel and choose one of the following option:
•
Migrate to... — Selects the required network form the list. To view the network ID press MENU key then
press Select.
•
Auto — Your radio automatically attaches to the predefined network.
Location
See the GPS Location Service for more information.
Related Links
GPS Location Service
Viewing Your Position
Procedure:
1 From the home screen, press the
2 Select More . . . → Location → Position.
3 Scroll to view the results about the last time your location was calculated.
Note: To refresh your position:
•
Select Position — the radio refreshes its position automatically
•
Press Refresh
Changing GPS Accuracy
Procedure:
1 From the home screen, press the
2 Select More . . . → Location → Accuracy.
3 Select one of the following:
•
Medium (default) — Power consumption optimization is combined with less position accuracy.
•
High – Better position accuracy is combined with less power consumption optimization.
Note: If connected to an external charging device, the radio automatically enters the High mode.
Packet Data
The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP).
Send Feedback
| |
key.
MENU
on page 53
key.
MENU
key.
MENU
Advertisement
Chapters
Table of Contents
