ViewSonic PX725HD User Manual page 45

Function
Signal
Selecting All allows the projector to turn on automatically once
the VGA/HDMI signal is fed through the VGA/HDMI cable.
CEC
Auto Power On
See
Direct Power On
Selecting On allows the projector to turn on automatically
once the power is fed through the power cord.
Auto Power Off
See
Sleep Timer
Smart Energy
See
Power Saving
See
See
Standby
details.
Settings
Selecting Enable you to restart the projector immediately
within 120 seconds after turning it off. After 120 seconds, if
the projector is not turned on again, it will directly enter the
standby mode.
Smart Restart
Selecting Enable enables the function and the projector will
not enter the cooling process after being shut down. Selecting
Disable disables the function and the projector will enter
normal cooling process after being shut down.
Quick Power
Off
Audio Settings See
Description
"Using the CEC function" on page 32
"Setting Auto Power Off" on page 44
"Setting Sleep Timer" on page 44
"Setting Power Saving" on page 44
"Using the projector in standby mode" on page 33
It takes some time to initiate this function. Make sure the
projector has been turned on for more than 4 minutes. If
the projector is resumed by using the Smart Restart
feature, this function can be executed immediately.
When All is selected, the Quick Power Off function will be
automatically set to "All".
If you attempt to restart the projector right after it's been
turned off, it may not be turned on successfully and will
rerun its cooling procedure.
When Disable is selected, the Smart Restart function will
be automatically turned off.
"Adjusting the sound" on page 33
40
for details.
for details.
for details.
for details.
for
for details.