Table of Contents
Advertisement
Controls and functions
Projector
1
2
1.
Focus ring
Adjusts the focus of the projected image.
2.
Zoom ring
Adjusts the size of the projected image.
3.
Power
Toggles the projector between standby
mode and Power ON.
4.
(Power indicator light)
Lights up or flashes when the projector is
under operation.
5.
(Temperature indicator light)
Lights up red if the projector's temperature
becomes too high.
6.
(Lamp indicator light)
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
7.
(Menu up)
Selects the desired menu items and makes
adjustments.
(Keystone key)
Manually corrects distorted images
resulting from an angled projection.
8.
Blank
Makes the screen blank.
9.
Menu
Turns on the On-Screen Display (OSD)
menu.
2
3
4 5 6
2
9
10 11 12 13 14 15
Exit
Goes back to previous OSD menu, exits
and saves menu settings.
10.
Source
Displays the source selection bar.
(Help)
Displays the HELP menu by a long press
for 3 seconds.
11.
(Volume down)
Decrease the volume level.
(Left)
Selects the desired menu items and makes
adjustments.
12.
(Menu down)
Selects the desired menu items and makes
adjustments.
(Keystone key)
Manually corrects distorted images
resulting from an angled projection.
13.
Enter
Enacts the selected On-Screen Display
(OSD) menu item.
14.
Color Mode
Selects an available picture setup mode.
15.
(Volume up)
Increase the volume level.
(Right)
Selects the desired menu items and makes
adjustments.
7
7
8
Advertisement
Table of Contents
