Shutting down the projector
1.
Press
Power and a confirmation message is displayed prompting you.
If you don't respond in a few seconds, the message will disappear.
2.
Press
Power a second time.
3.
Once the cooling process finishes, a "Power Off Ring Tone" will be heard. Disconnect
the power cord from the wall socket if the projector will not be used in an extended
period of time.
To turn off the ring tone, see
CAUTION
•
To protect the lamp, the projector will not respond to any commands during the cooling
process.
•
To shorten the cooling time, you can also activate the Quick Power Off function. See
"Quick Power Off" on page 40
•
Do not unplug the power cord before the projector shutdown sequence is complete.
"Turning off the Power On/Off Ring Tone" on page 33
for details.
34
for details.