Table of Contents
Advertisement
6.
Anamorphic: Scales a 2.35:1 aspect image so
that it fills the screen.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
•
Press Standard, Gaming, Movie and Sports on the remote control until your desired
mode is selected.
•
Go to the IMAGE > Color Mode menu and press
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1.
Brightest mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2.
Sport: Optimized for viewing sport match in well-lit environments.
3.
Standard mode: Is designed for presentations under daylight environment to match
PC and notebook coloring.
4.
Gaming: Suitable for playing video games in a bright living room.
5.
Movie mode (Rec.709): Is appropriate for playing colorful movies, video clips from
digital cameras or DVs through the PC input for best viewing in a blackened (little
light) environment.
6.
ISF Day/ISF Night mode: Only available when ISF Mode is On.
Selectable lamp modes may vary depending on the Color Mode selected.
Using Screen Color
In the situation where you are projecting onto a colored surface such as a painted wall which
may not be white, the Screen Color feature can help correct the projected picture's colors to
prevent possible color difference between the source and projected pictures.
To use this function, go to the DISPLAY > Screen Color menu and press
color which is closest to the color of the projection surface. There are several precalibrated
colors to choose from: Whiteboard, Greenboard, and Blackboard. The effects of these
settings may vary depending on different models.
This function is only available when a PC or HDMI input signal is selected.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available.
You can make adjustments to these functions based on your needs.
2.35:1 picture
/
to select a desired mode.
26
/
to select a
Advertisement
Table of Contents
