Page 2
Package Checklist KCM-0832 or KCM 1632 Quick Installation Guide Introduction Each Host port connector is HDDB15 type. The 3-in-1 VGA cable has a HDDB15 male connector at one end, plug it into PC port of KVM switch back panel, and plug the other end’s connectors to PC VGA port, and if ■...
Page 3
Install the Computer/Server on Host Side Local Console --- Connect the keyboard, mouse and monitor to the local console ports. The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.
Page 4
Hotkeys & OSD The table blow lists all supported hotkey commands. Command Function Space bar Bring up the OSD overlay screen ↑or↓ Moving Up or Down ■ The first digit is bank number starting with “1”. The first KVM [1,2,..,8] bank, switch unit on the Daisy chain line is of bank 1 (the Master).