Contents OverView Features Package Content Connection Operation LED Indicators Hotkey Commands Trouble shooting Please read this manual thoroughly and follow the Installation procedures to prevent any damage to LevelOne Cable KVM or any connecting device.
KVM switch is your best companion while accessing two computers. Connecting the two cables from the LevelOne Cable KVM to the keyboard, mouse and monitor ports of your computers is all it takes! Once done, you get all the conveniences of controlling your computers with only one PS/2 keyboard, mouse and monitor.
Connect a PS/2 keyboard, a PS/2 mouse and a VGA monitor to the respective ports on LevelOne KVM-0201. The complete installation is shown in figure 2. Strap LevelOne KVM-0201 to your desktop, computer or cubical wall with the molded loop, if the ground floor is not the preferable place for the Cable KVM.
Page 5
! To re-sync the mouse: Regain mouse control after hot plug-and-play. left- left- Specification LevelOne KVM-0201 Computer port number 2 Computer status LED Red x 2 Computer selection Hotkey commands Emulation keyboard PS/2; AT Emulation mouse PS/2 Scan Interval 3, 8, 15, 30 sec.
Page 6
Trouble shooting Before you start, double-check all the connections. Make sure all the connectors are well seated. Keyboard connector and mouse connector are color-coded. Make sure only connectors of the same colors are mated and recycle the power for both computers. Symptom solutions Possible causes Recommended...
Page 7
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE PRODUCT EXCEEDS THE PRICE PAID FOR THE PDOCUDT., The direct vendor makes no warranty or representation, expressed or implied with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.