GreenWorks GWSN20130 Owner's Manual page 23

MAiNTENANCE
STORAGE
• Run the snow thrower for a few minutes in order to melt any snow that may be left on the snow
thrower.
• Wipe the snow thrower off with a dry cloth before storage. This will help prevent ice building
up on the unit and parts freezing.
• Disconnect the extension cord from the snow thrower.
• inspect the extension cord thoroughly for signs of wear or damage. Replace it if it is worn or
damaged.
• inspect the snow thrower thoroughly for worn, loose, or damaged parts. if any parts must be
repaired or replaced, contact the toll-tree helpline, at 1-888-909-6757.
• Store the extension cord with the snow thrower.
• Store the snow thrower in a clean, dry place. Cover it in order to provide added protection.
23