GreenWorks GWSN20130 Owner's Manual page 22

MAiNTENANCE
REPLACING THE ImPELLER (See Figures 14)
• Remove the 5 screws (1) that secure the right side cover (2) to the frame of the snow thrower.
• Remove the nut (3).
• Remove the 5 screws (4) that secure the left side cover (5) to the frame of the snow thrower.
• Remove the belt (6).
• Using a socket wrench, remove the the large pulley (7).
• Remove the 5 screws (8) that secure the left side plate (9) and remove the left side plate.
• Pull the axle (10) and remove the old impeller (11).
• install the new impeller.
• Reinstall the left side plate, large pulley, belt and left side cover.
• Reinstall the nut and right side cover.
3
1
2
9
8
7
6
11
10
4
5
Fig. 14
22