Section 10 − Maintenance & Troubleshooting; Routine Maintenance; Blowing Out Inside Of Unit - Miller XMT 450 CC/CV Owner's Manual

.
A complete Parts List is available at www.MillerWelds.com
SECTION 10 − MAINTENANCE & TROUBLESHOOTING

10-1. Routine Maintenance

Damaged Or

10-2. Blowing Out Inside Of Unit

OM-257220 Page 42
!
Replace
Unreadable
Labels
Disconnect power
before maintaining.
3 Months
Repair Or
Replace
Cracked
Cables
6 Months
Blow Out Inside
.
Maintain more often
during severe conditions.
Replace Cracked
Torch Body
Repair Or Replace
Cracked Cables
And Cords
Clean
And
Tighten Weld
Connections
!
Do not remove case when
blowing out inside of unit.
To blow out unit, direct airflow
through front and back louvers as
shown.
Ref. 277774-A