Dimensions And Weight; Environmental Specifications - Miller XMT 450 CC/CV Owner's Manual

.
A complete Parts List is available at www.MillerWelds.com

4-5. Dimensions and Weight

Hole Layout Dimensions
A 8-11/16 in. (221 mm)
B 11-3/8 in. (289 mm)
C 15-3/4 in. (400 mm)
D 22-7/16 in. (570 mm)
E 2-3/4 in. (70 mm)
F 3-3/8 in. (86 mm) Dia.
G 1/4-20 UNC 2B Thread
Weight
122 lb (55.3 kg)

4-6. Environmental Specifications

A. IP Rating
but is not intended to be used for welding outside during precipitation unless sheltered.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
2,172,158 VA). It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if
necessary, that the system impedance complies with the impedance restrictions.
Notes
OM-257220 Page 14
D C
F
E
A
B
IP Rating
This equipment is designed for outdoor use. It may be stored,
at the point of common coupling is less than 73.66 mW (or the short−circuit power S
max
14.5 in.
(368 mm)
G
IP23
26.8 in.
(681 mm)
17.2 in.
(437 mm)
Ref. 277774-A
IP23 2014−06
is greater than
sc
ce-emc 1 2014-07