Advertisement
D-Link Co.,_______________________________________________________________________ FAQ
The calculation of these values depends on rather the link is to
a remote node or dial in user.
it depends on what is choose in Menu 11.2, Remote Node PPP
Option, for BOD Calculation.
and ALU represent only the incoming traffic.
Transmit, then they represent only the outgoing traffic.
choose is Transmit or Receive, then it represents whichever
traffic is greater.
Transmit or Receive.
Why is remote node calculation so complicated?
Because it's also used for bringing up the second channel.
So, if you set you Target Utility as 32-48Kbps and the connection
speed is 64K, then the second line will be brought up if the CLU
reaches 75% and the second line will be dropped if CLU drops to
50%. ( Note, the CLU has to maintain that level of usage for the
specified persist time before the second line is brought up or
dropped. )
20.
How do I setup Compression to work with Ascend?
Ascend supports 2 styles of Stac compression.
proprietary stuff that was implemented before CCP standard was
finalized.
included in the standard.
which is actually check mode 4 in the standard.
support their proprietary check mode.
(sequence number) and 4 (extended mode, proposed by Microsoft) in
the standard.
If CCP negotiation fails, it could be 1. compression is off; or
2. compression is set to "Stac", instead of "MS Stac" in Ascend
MAX/Pipeline.
Part V:
Miscellaneous Questions
1.
How can I tell what version of system code I have?
For the RAS software version: see menu 24.1
For the ISDN firmware version: see menu 24.1
For the bootmodule version: see the screen during system startup
2.
How can I upgrade system code?
The SMT (System Management Terminal) has an option (Menu 24,
option 7) that allows you to easily upgrade the system code.
Once you execute this option, you can follow the onscreen
instructions to upload the system code.
XMODEM to download the code.
this procedure, please refer to: Maintenance of the User's Guide.
3.
What can I do if I have problems upgrading my system code?
If you have any problems when you upload the system code, try
uploading the code in a DOS environment as opposed to a Windows
Dial in user links always calculate as
For unknown reasons, they did not request it to be
The other is what they call "MS-Stac",
If the link is to a remote node,
If the choose is Receive, then CLU
If the choose is
One is their
We support check mode 3
You will need to invoke
For a more detailed description of
If the
D-Link does not
FAQ: 28
Advertisement
