Advertisement
D-Link Co.,_______________________________________________________________________ FAQ
across the link.
16.
How do I block Win95 or NT's NetBEUI over IP packets from
triggering a call to my ISP?
Setup a filter set as follows, and plug it in Menu 11 for the ISP
remote node in the 'Call filter sets='.
# A Type
- - ---- -------------------------------------------------- - - -
1 Y IP
Pr=17, SA=0.0.0.0, SP=138, DA=0.0.0.0
2 Y IP
Pr=17, SA=0.0.0.0, SP=137, DA=0.0.0.0
3 Y IP
Pr=6, SA=0.0.0.0, SP=138, DA=0.0.0.0
4 Y IP
Pr=6, SA=0.0.0.0, SP=137, DA=0.0.0.0
5 N
6 N
TCP Estab= N/A
More= No
Action Matched= Drop
Action Not Matched= Check Next Rule
Menu 21.1.2 - TCP/IP Filter Rule
Filter #: 1,2
Filter Type= TCP/IP Filter Rule
Active= Yes
TCP Estab= N/A
More= No
Action Matched= Drop
Please see the manual for more information.
Menu 21.1 - Filter Rules Summary
Filter Rules
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol=
17 IP Source Route= No
Destination:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Source:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 138
Port # Comp= Equal
Log= None
IP Protocol=
17 IP Source Route= No
Destination:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Source:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
Log= None
M m n
N D N
N D F
N D N
N D F
FAQ: 17
Advertisement
