Advertisement
D-Link Co.,_______________________________________________________________________ FAQ
13.
Can you clarify the capabilities of the Router for using both B-
channels simultaneously?
The Router can simultaneously do the following:
Make 2 ISDN data calls (either bundled or to separate nodes).
Make 1 ISDN data call and 1 POTS or A/B adapter (voice) call.
14.
If I want to monitor line status in Menu24.1, will it auto-logout
after 5 minutes?
No, the SMT will not timeout in Menu 24.1.
15.
Can I use Router CLID callback feature to callback to Windows 95
or Windows NT?
No, you can't. The reason is Win95 and NT must use CBCP to
negotiation the callback function. If you use the CLID callback,
Router will do a callback without answering the incoming call. To
Win95, this is a call failure, and Win95 will not reach to a
state to wait for callback.
16.
Can I use the Router CLID callback feature to call back to a
remote node?
Yes, you can configure CLID callback to a remote node by setting
the following parameters:
. the CLID Authen field in menu 13 must be set to 'Required'
. the Remote Node call direction must be set to 'Both'
. the Remote Node must have enabled the CLID service on their
ISDN
. the CLID must match the value you give in the 'Rem CLID' field
. the number entered in 'PrI Phone #' will be the number dialed
17.
Can I manually set the CLID callback timer?
Yes, you can set the delay time before Router starts a CLID
callback. The default value is 5 seconds, and you can change it
in SMT 24.8 (CI) by issuing 'dial timeout callback <seconds>'.
18.
How do I drop both B channels when they are bundled in an MP
call?
You can go to Menu 24.8 and issue 'isdn drop all' to drop both B
channels.
19.
What do CLU and ALU mean in Menu 24.1? What's the relationship
to MP/BOD?
CLU is the current line utilization.
total bandwidth being used.
ALU is the average line utilization.
average bandwidth used.
It's the percentage of the
It's the percentage of the
FAQ: 27
Advertisement
