Advertisement
D-Link Co.,_______________________________________________________________________ FAQ
5.e
Bridging IPX
1.
Router on the NetWare server side
The Router can accept calls from a remote router to Bridge
IPX packets.
remote network (Rem-net) will have access to the IPX
network resources available on 'My-net'.
In Menu 1:
-
In Menu 3.4:
-
In Menu 11.1:
-
-
-
In Menu 11.3:
-
The remote ISDN router (Cisco, Ascend...etc.) will have to
complete similar configuration changes in order to talk to
the Router.
2.
Router on the NetWare client side
The Router can place calls to a remote ISDN router to
Bridge IPX packets.
the LAN (My-net) will have access to the IPX NetWare server
and other network resources available on 'Rem-net'.
that in this setup, there is no NetWare server on 'My-net'.
My-net
|
O--|
|---[Router]-----------[ISDN Router]---|
O--|
^
|
|
NetWare
Server
In this configuration, the stations on the
Set Bridge to 'Yes'.
Set Handle IPX to 'Server'.
Set Call Direction to 'Incoming'.
Set Bridge to 'Yes'.
Select 'Yes' to editing the Bridge options.
Set Dial-On-Broadcast to 'No'.
My-net
|
O--|
|---[Router]-----------[ISDN Router]---|
O--|
^
|
|
NetWare
Client
In this configuration, the stations on
Rem-net
|
|--O
|--O
|
^
|
NetWare
Client
Rem-net
|
|--O
|--O
|
^
|
NetWare
Server
Note
FAQ: 11
Advertisement
